|
accessories |
|
|
 |
|
Taber® 5135 & 5155 Rotary Abrasers Multi-Media Attachment This attachment
is used to recreate contact surface wear caused by liquids, fluids
and powders. Measure the abasivity of materials including paints,
pigments, adhesives, sealants, pastes, additives, etc.
|
|
|||||||||||||
|
Grit Feeder Attachments Provide a unique method to evaluate 3-body abrasion resistance on a variety of materials. Aluminum Oxide grit particles are evenly distributed onto the specimen wear path, and pass under a pair of leather wheels. This loose grit acts as an abradant and aids in the rolling action that contributes to the physical breakdown of materials. The Abraser Vacuum is attached to the grit feeder, and continuously removes both abraded material and used grit. Two versions are available, the Model 155 (shown) and the Model 255. The Model 155 uses an alignment guide screw to set the position of the instrument. Grit distributor and vacuum removal nozzle heights are adjusted using a thumbscrew. Whereas, an alignment block isincorporated into the base of Model 255, to ensure the correct location of the grit feeder in relation to the Abraser. Both models are supplied complete with:
|
 |
|||||||||||||
|
Sample Cutter The Model 5000 Sample Cutter will cut precise, 4.2" circular samples with a ¼" center hole to prepare your specimens for use with the Taber Abrasers. An easy counter-clockwise cutting motion allows you to cut a variety of materials. Optional pads allow you to cut materials in thickness of 0.001" to 0.25". With a recessed cutting blade, shielded punch drive shaft, and ergonomic handle, this rugged instrument was designed for safety and can be used in any production or laboratory environment. Supplied complete with:
|
|
|||||||||||||
|
Diamond-Wheel Refacer Recommended to refresh the contact surfaces of Calibrade® wheels to ensure accurate test results. It can also be used to true out of round wheels and correct 'crowning' conditions on both Calibrase® and Calibrade® wheels.
|
|
|||||||||||||
|
Quick Release Wheel Hub An expandable collet
hub design permits quick wheel mounting. Activated by a push button,
a spring-loaded, beveled retaining nut provides a positive locking force
on the hub retaining lip making certain that wheels remain securely
fastened until disengaged. By eliminating the left and right hand locking
nuts, the viewing area of the test specimen is increased and interference
with the vacuum pick-up nozzle is eliminated.
|
|
|||||||||||||
|
Quiet Cabinet Allows you to reduce the sound level of operating your Taber Abraser, by approximately 20%. Comprised of an upper and lower unit, this solid wood cabinet is suitable for use within any laboratory environment. The upper cabinet provides a convenient, dust-free work space for your Abraser and features a Plexiglas viewing window to monitor testing, and removable front for easy transfer of Abraser into or out of the cabinet. The lower cabinet holds the Abraser Vacuum Unit and includes a built-in exhaust system to provide the proper air circulation. Both cabinets offer ample room to store test specimens, supplies, and accessories. The Quiet Cabinet can be purchased as a complete unit or the top half or bottom half only. The lower cabinet exhaust system is available for 115V, 60Hz or 230V, 50Hz.
|
 |
|||||||||||||
|
|
Calibration Verification Kit A cost-effective method that enables users to verify if an instrument is in calibration or determine if the instrument should be recalibrated or repaired. Each kit is individually calibrated and provides a fast, reliable system check. Kit allows you to verify:
Supplied complete with:
|
|||||||||||||
 |
||||