specifications

Elcometer Home Page

 

 

Elcometer 456 Separate Coating Thickness Gauge with Bluetooth®†

TECHNICAL SPECIFICATION
Measurement Speed Greater than 60 readings per minute
Display STN Graphics (LCD), 128 x 64 pixels; 19.8 x 39.6mm (0.78" x 4.56")
Battery Type 2 x AAA (LR03). Rechargeable batteries can be used
Battery Life+ 30 - 40 hours continuous use with alkaline batteries
Minimum Substrate Thickness

Ferrous: 0.3mm (12mils); Non-Ferrous: 0.1mm (4mils) unless special calibration adjustment is made
Operating Temperature 0°C - 50°C (32°F - 120°F)
Dimensions 128 x 68 x 28mm (5.0 x 2.7 x 1.1")
Weight (including batteries) 130g (4.58oz)
+ With Bluetooth® disabled

 

PART NUMBER
BASIC
STANDARD (with Bluetooth®)
TOP (with Bluetooth®)
Ferrous Separate
A456FBS
A456FSS
A456FTS
Non-Ferrous Separate
A456NBS
A456NSS
A456NTS
Dual FNF Separate
A456FNFBS
A456FNFSS
A456FNFTS
Packing List Elcometer 456 Separate Gauge, carry pouch, wrist harness, 2 x LR03 batteries, ElcoMaster™ and ElcoMaster™ Mobile Software (Standard and Top models only) and operating instructions.
Probes A variety of probes and scale ranges is available for the Elcometer 456 Separate gauge. Probes are supplied complete with an appropriate set of calibration foils

 

SPARES AND ACCESSORIES
Description
Part Number
Gauge-to-PC (RS232) Cable
T99916217
RS232 to USB Cable Adaptor
T99916716
Gauge-to-PC (USB) Cable Kit
T99916217A
USB Bluetooth® Transmitter/Receiver for PC
T99920130
Jumbo Hand Grip - F and N Probes
T9997766-
Jumbo Hand Grip - FNF Probe
T99913225
V-Probe Adaptor - F and N Probes
T9997381-
V-Probe Adaptor - FNF Probe
T99913133
Probe Placement Jig
T95012880

 

 

† Standard and Top models only

 

www.elcometer.com