|
Elcometer 7061
MarSurf PS1 Surface Roughess Tester
|
TECHNICAL
SPECIFICATION
|
| Unit
of Measurement |
Metric,
inch |
| Measuring
Principle |
Stylus
Method |
Stylus
Pick-Up Supplied
(Other stylus pick-ups are available)
|
Inductive
skidded stylus pick-up, 2µm (80µin) stylus tip, measuring
force approx. 0.7 mN |
| Parameters |
24
(with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS),
Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2,
Vo, Rt, R3z, RPc, Rmr equiv. to Tp (JIS, ASME), RSm, R, Ar, Rx |
| Measuring
range |
350µm,
180µm, 90µm (changes automatically) |
| Profile
resolution |
32nm,
16nm, 8nm (changes automatically) |
| Filter* |
Phase-correct
profile filter (Gaussian filter) according to DIN EN ISO 11562,
special filter according to DIN EN ISO 13565-1, ls filter according
to DIN EN ISO 3274 (can be disabled) |
| Cutoff
lc* |
0.25mm,
0.8mm, 2.5mm; automatic (0.010", 0.030", 0.100") |
| Traversing
length Lt* |
1.75mm,
5.6mm, 17.5mm; automatic (0.069", 0.22", 0.69") |
| Traversing
length (acc. to MOTIF) |
1mm,
2mm, 4mm, 8mm, 12mm, 16mm (0.040", 0.080", 0.160",
0.320", 0.480", 0.640") |
| Short
cutoff* |
Selectable |
| Evaluation
length ln* |
1.25mm,
4.0mm, 12.50mm (0.050", 0.15", 0.50") |
| Number
n of sampling lengths* |
Selectable:
1 to 5 |
| Calibration
function |
Dynamic |
| Memory
capacity |
Max.
15 profiles, max. 20,000 results |
| Other
functions |
Blocking
of settings (code-protected), date/time |
| Battery |
Li-ion
battery |
| Interfaces |
USB,
MarConnect (RS232) |
| Dimensions |
140mm
x 50mm x 70mm (5.51" x 1.97" x 2.76") |
| Weight |
400g
(0.88lbs) |
| Long-range
power supply |
100V
to 264V |
| Packing
List |
Elcometer
7061 MarSurf PS1 base unit, drive unit, 1 x standard stylus pick-up,
built-in battery, roughness standard integrated into casing, height
adjustment accessory, stylus pick-up protection, universal charger
/ mains adapter, USB cable, carry case with shoulder strap and
belt loop, calibration certificate and operating instructions |
| Part
Number |
K7061M001 |
| *
According to ISO/JIS |
|
ELCOMETER
7061 STYLUS PICK-UPS
|
| 1 |
Description |
Part
Number
|
|
|
Stylus
pick-up Extension; 80mm (3.15"); Ideal for measuring points
located deep within cylinders |
KT007061P001
|
|
|
Stylus
pick-up PHT 3-350; For measurements in bores from 3mm (0.12")
diameter |
KT007061P002
|
|
|
Stylus
pick-up PHT 11-100; For measurements at recessed measuring points,
e.g. in grooves from 2.5mm (0.10") wide and up to 7.5mm (0.30")
deep |
KT007061P003
|
|
|
Stylus
pick-up PHTR 100; For measurements on concave and convex surfaces |
KT007061P004
|
|
|
Stylus
pick-up PHTF 0.5-100; For measurements on tooth flanks |
KT007061P005
|
|
|
Stylus
pick-up PT 150; Dual-skid stylus pick-up for measurements on metal
sheets and roller surfaces according to DIN EN 10049 (SEP) |
KT007061P006
|
|
|
Stylus pick-up
PHT 6-350
Stylus pick-up PHT 6-350, 5µm Probe Tip
For measurements on flat planes, in bores from 6mm (0.24"),
17mm (0.67") deep and in grooves from 3mm (0.12")
wide
|
KT007061P007
KT007061P008
|
|
|
Stylus
pick-up Set; Comprising of Stylus pick-up PHT 3-350 & Stylus
pick-up PHT 11-100 |
KT007061P009
|
|
MISCELLANEOUS
ACCESSORIES
|
| Description |
Part
Number
|
| Measuring
Stand ST-D |
KT007061P010
|
| Measuring
Stand Mount - Required to fix the Elcometer 7061 to the measuring
stand |
KT007061P012
|
| End
Face Vee-Block - For measuring on flat faces of cylindrical and
planar components |
KT007061P011
|
| Adapter
Set for Transverse Tracing; Comprising of Adapter for Transverse
Tracing and Vee-Block Holder with Vee-Block - For hand-held transverse
tracing of cylindrical measuring objects |
KT007061P013
|
| Accessory
Set; Comprising of Stylus pick-up Extension, Adapter for Transverse
Tracing, Measuring Stand Mount and End Face Vee-Block |
KT007061P014
|
| MSP2
Printer with Connecting Cable |
KT007061P015
|
| MarSurf
PS1 Explorer Evaluation Software |
KT007061P016
|
www.elcometer.com
|
|
