| |
 |
|
Elcometer
4340 Motorised Film Applicator / Automatic Film Applicators
When preparing
a wide range of samples with different coatings and on various substrates,
the Elcometer 4340 film applicator is the unit for you. Designed
with 11 pre-set speeds, coatings can be applied with total consistency.
A range of tables and adaptions can be selected. Vacuum, electromagnetic
or heated tables, drying time recorders and gelatine devices are
available.
|
|
|
 |
|
Elcometer
4360 Spiral Bar Coaters
Made of stainless
steel, these wire wound bar coaters are used to spread coatings
which have a high levelling ability. Coatings can be applied to
a wide range of substrates, including flexible ones!
|
| |
 |
|
Elcometer
3520 Baker Film Applicator
The baker film
applicator is made of hardened stainless steel and has a cylindrical
applicator body. Used to apply a pre-defined thickness and film
width on flat, relatively firm surfaces.
|
| |
 |
|
Elcometer
3525 & Elcometer 3530 Adjustable Baker Film Applicators
Similar to
the Elcometer 3520 baker gauges above, the adjustable baker applicator
allows the user to determine the thickness of the film being applied.
Using the thickness markings on each side of the gauge, the operator
can produce either a uniform film or a film wedge.
|
| |
 |
|
Elcometer
3540 & Elcometer 3550 Bird Film Applicators
The bird appicators
have a flat edged prismatic body and are manufactured out of precision
ground stainless steel and are suitable for various coatings which
are applied to flat and relatively strong substrates.
|
|
|
 |
|
Elcometer
3545 Adjustable Bird Film Applicators
The adjustable
version of the bird film applicator allows the user to determine
the thickness of the film being applied. Adjusting the gap size
using the scales on either side the operator can produce either
a uniform or wedged film thickness.
|
|
|
 |
|
Elcometer
3580 Casting Knife Film Applicator
Manufactured
out of anodised aluminium and with a bevelled blade, these applicators
are ideal for manually applying thick layers of coatings on solid
and flat substrates. Films can be applied up to 6mm thick - the
thickness being determined using the micrometric screws on the unit.
|
| |
 |
|
Elcometer
3570 Micrometric Film Applicators
For high precision,
manual application of a film, the Elcometer 3570 micrometric film
applicator is ideal. The film thickness can be adjusted in 1 micron
steps - using the micrometric screw.
|
| |
 |
|
Elcometer
3600 Doctor Blade Film Applicator
This simple
applicator can be adjusted to allow the user to apply a uniform
film up to a thickness of 1mm (40 mils). Accurate thickness settings
are produced using the thickness standards supplied with the gauge.
|
| |
 |
|
Elcometer
3700 Doctor Blade Film Applicator - with reservoir
Similar in
operation and design to the Elcometer 3600, this unit has the added
advantage of a reservoir to store the coating.
|
|
|
 |
|
Elcometer
3800 & Elcometer 3805 Multiple Width Applicator - Doctor Blade
In some circumstances
it may be required to compare two coatings side by side. The Elcometer
multiple film applicator allows the user to apply either 2 or 3
coatings (dependant on selected model) at the same time.
|
| |
 |
|
Elcometer
3508 & Elcometer 3560 Multiple Gap Applicator - 4 gaps with
reservoir
This simple
to use applicator has 4 pre-set film thicknesses, one on each edge.
The Elcometer 3508 is supplied with two reservoirs making it ideal
for use with the Elcometer
1720 Washability Tester, the Elcometer 3560 has a single
reservoir.
|
| |
 |
|
Elcometer
3505 Cube Film Applicator
Designed to
be used with the Elcometer
5300 Linear Drying Time Recorder, the cube film applicator
provides a thin film strip up to 1mm (40 mils) and is available
as a single stripe applicator or as a 5 stripe version.
|
|
|
 |
|
Leneta
Test Charts
The industry
standard in black and white test charts for use with film applicators.
|
