|
|
 |
|
Elcometer
224 Digital Surface Profile Gauges*
The Elcometer
224 provides the very latest in surface profile technology. Accurate
and user friendly, this surface profile gauge is available with
(Elcometer
224 Model T with Bluetooth®)
or without memory (Elcometer
224 Model S) and statistics. Memory versions can store up
to 50,000 readings in 999 batches.
* Patent
Applied For
|
|
|
 |
|
Elcometer
123 Surface Profile Gauge
This is an
easy to use gauge that measures the peak-to-valley height of a blast
cleaned surface. The average of a series of measurements provides
an indication of the surface roughness and allows the surfaces to
be compared as blasting proceeds.
|
| |
 |
|
Elcometer
223 Digital Surface Profile Gauge
The Elcometer
223 is a battery operated digital surface profile gauge which measures
the peak-to-valley height of a surface in a similar way to the Elcometer
123 analogue equivalent, but with the added benefit of a direct
RS232 output for data logging.
|
|
 |
|
Elcometer
122 Testex Replica Tape
The Elcometer
122 testex tape allows the user to measure the peak-to-valley height
of the profile and record it. Testex tape consists of foam with
a non-compressible backing. The foam side is rubbed into the surface
providing a permanent mould of the profile. The Elcometer 124 Thickness
Gauge is then used to measure the peak-to-valley height of the profile
formed.
|
|
|
 |
|
Elcometer
124 Thickness Gauge
The Elcometer
124 thickness gauge is used to measure the peak-to-valley height
of a surface profile formed in the Elcometer 122 Testex Tape.
|
|
|
 |
|
Elcometer
125 Surface Comparator
Surface comparators
allow the estimation of surface roughness by both touch and sight.
These simple roughness gauges consist of 4 blasted profiles of varying
roughness and are available either in a grit blasted or a shot blasted
version.
|
|
|
 |
|
Elcometer
129 Rubert & Rugotest Surface Comparators
Similar to
the Elcometer 125, the Elcometer 129 roughness comparators are available
in two models: The Elcometer 129 Rubert is available in grit and
shot versions whereas the Elcometer 129 Rugotest includes the shot
and grit profiles on the same block.
|
| |
 |
|
Elcometer
127 Keane-Tator Surface Comparator & Magnifier
These comparators
from keane-tator are designed to be used with a magnifier. Consisting
of 5 blasted profiles on displayed with the roughness value on each
disc. In the middle of the disc there is a hole for the comparison
to be undertaken using the magnifier. Sand, shot or grit versions
available.
|
| |
 |
|
Elcometer
133 Ships Propeller Roughness Comparators
Similar to
the other comparators, the ship propeller roughness comparator have
been developed for the specific profiles related to the condition
of ships propellers over the life of the propeller. Comparators
are also supplied with guidance on the report for Propeller Blades.
|
|
 |
|
Elcometer
119 Pipe Pit Gauge
The Elcometer
119 pipe pit gauge is a small pocket sized gauge designed to identify
the condition of a pipe. The gauge is placed horizontally on the
surface of the pipe and the stylus is positioned into the base of
the corrosion pit. The gauge shows the pit depth compared to the
nominal pipe wall thickness.
|
|
 |
|
Elcometer
7061 MarSurf PS1 Surface Roughess Tester
In protective
coating applications there is a requirement to measure surface roughness.
Measurements of Surface Roughness are expressed in terms of Ra,
Rz or Tp. These values include peak-to-valley profile measurement
in combination with an assessment of the frequency of peaks within
the sample area. The
Elcometer 7061 is a light weight and portable measuring solution
for the range of surface roughness measurements required for compliance
to International Standards.
|
