accessories

Elcometer Home Page

 

 

Elcometer 236 DC Holiday Detector

 

ELCOMETER 236 PROBE ACCESSORIES
The Elcometer 236 has a wide range of accessories and adaptors to allow you to test wherever you are.  If you do not see the accessory that you require, please contact Elcometer.

 

TELESCOPIC PROBE HANDLE
Glass fibre, fully insulated behind the ring, this low cost telescopic probe handle has been designed to allow the user to reach high areas from the ground or a platform. Using a simple twist and lock procedure the user can extend the handle to any length between the minimum and maximum.
Description
Part Number
Telescopic Probe Handle 0.6 – 1.2m (24 - 47")
T236155971
Telescopic Probe Handle 1.8 – 3.6m (71 - 142")
T236155972

 

EXTENSION PIECES
To extend the probe for applications where a long reach is required, ideal for internal pipe inspection. Screw in the two pieces into the coupling piece and extend as far as you need to.
Description
Part Number
Probe Extension Piece 250mm (9.8”)
T2362663A
Probe Extension Piece 500mm (19.7”)
T2362663B
Probe Extension Piece 1000mm (39.4”)
T2362663C
Coupling Piece – to link to Extension Pieces together
T2362666-

 

BAND BRUSH PROBE
Provided as standard when an Elcometer 236 is purchaced, it is an ideal accessory for complex shapes, small products and for accessing drill holes, eyes, etc
Description
Part Number
Band Brush Probe
T2362669-

 

RIGHT ANGLE WIRE BRUSH PROBES
Manufactured out of  Phosphor Bronze these wire brush probes are ideal for testing large, flat surfaces. A range of widths are available.
Description
Part Number
Right Angle Wire Brush Probe - 250mm (9.8”)
T23638071
Right Angle Wire Brush Probe - 500mm (19.7”)
T23638072
Right Angle Wire Brush Probe - 1000mm (39.4”)
T23638073
Replacement Wire Brush – Electrode Only - 250mm (9.8”)
T99926621
Replacement Wire Brush – Electrode Only - 500mm (19.7”)
T99926622
Replacement Wire Brush – Electrode Only - 100mm (39.4”)
T99926623

 

RIGHT ANGLE CARBON INFUSED RUBBER PROBES
Ideal for testing large, flat surfaces with either thin or delicate coatings. A range of widths are available.
Description
Part Number
Right Angle Rubber Probe - 250mm (9.8”)
T23638081
Right Angle Rubber Probe - 500mm (19.7”)
T23638082
Right Angle Rubber Probe - 1000mm (39.4”)
T23638083
Right Angle Rubber Probe - 1400mm (55.1”)
T23638084
Replacement Rubber  – Electrode Only - 250mm (9.8”)
T99926731
Replacement Rubber – Electrode Only - 500mm (19.7”)
T99926732
Replacement Rubber – Electrode Only - 1000mm (39.4”)
T99926733
Replacement Rubber – Electrode Only - 1400mm (55.1”)
T99926734

 

EXTERNAL PIPE ROLLING SPRING PROBES
Part Number
Nominal Pipe Size
Pipe External Diameter
DN (mm)
NPS (inches)
Min (mm)
Max (mm)
Min (inches)
Max (inches)
T23620507
Elcometer 236 Rolling spring Holder (Select the appropriate spring dimater required from the list below)

T99920438-15A

40
1.5
48
54
1.9
2.1
T99920438-15B
40
1.5
54
60
2.1
2.4
T99920438-20A
50
2
60
66
2.4
2.6
T99920438-20B
50
2
66
73
2.6
2.9
T99920438-25A
65
2.5
73
80
2.9
3.1
T99920438-25B
65
2.5
80
88
3.1
3.5
T99920438-30A
80
3
88
95
3.5
3.7
T99920438-30B
80
3
95
100
3.7
3.9
T99920438-35A
90
3.5
100
108
3.9
4.3
T99920438-35B
90
3.5
108
114
4.3
4.5
T99920438-40A
100
4
114
125
4.5
4.9
T99920438-45A
114
4.5
125
136
4.9
5.4
T99920438-45B
114
4.5
136
141
5.4
5.6
T99920438-50A
125
5
141
155
5.6
6.1
T99920438-50B
125
5
155
168
6.1
6.6
T99920438-60A
152
6
168
180
6.6
7.1
T99920438-60B
152
6
180
193
7.1
7.6
T99920438-70A
178
7
193
213
7.6
8.4
T99920438-70B
178
7
213
219
8.4
8.6
T99920438-80A
203
8
219
240
8.6
9.4
T99920438-90A
229
9
240
264
9.4
10.4
T99920438-100A
254
10
264
290
10.4
11.4
T99920438-110A
279
11
290
320
11.4
12.6
T99920438-120A
305
12
320
350
12.6
13.8
T99920438-140A
356
14
350
375
13.8
14.8
T99920438-140B
356
14
375
400
14.8
15.7
T99920438-160A
406
16
400
435
15.7
17.1
T99920438-160B
406
16
435
450
17.1
17.7
T99920438-180A
457
18
450
500
17.7
19.7
T99920438-200A
508
20
500
550
19.7
21.7
T99920438-220A
559
22
550
600
21.7
23.6
T99920438-240A
610
24
600
650
23.6
25.6
T99920438-260A
660
26
650
700
25.6
27.6
T99920438-280A
711
28
700
750
27.6
29.5
T99920438-300A
762
30
750
810
29.5
31.9
T99920438-320A
813
32
810
860
31.9
33.9
T99920438-340A
864
34
860
910
33.9
35.8
T99920438-360A
914
36
910
960
35.8
37.8
T99920438-380A
965
38
960
1010
37.8
39.8
T99920438-400A
1016
40
1010
1060
39.8
41.7
T99920438-420A
1067
42
1060
1110
41.7
43.7
T99920438-440A
1118
44
1110
1160
43.7
45.7
T99920438-460A
1168
45
1160
1210
45.7
47.6
T99920438-480A
1219
48
1210
1270
47.6
50.0
T99920438-500A
1270
50
1270
1320
50.0
52.0
T99920438-520A
1321
52
1320
1370
52.0
53.9
T99920438-540A
1372
54
1370
1425
53.9
56.1

 

INTERNAL PIPE WIRE BRUSH PROBES
Designed specifically to measure the internal diameter of pipes. A range of internal diameters are available.
Diameter
Part Number
mm
Inches
Full Assembly Wire Brush, Holder & 250mm Extension Piece
Brush Only
38
1.5
T2363907A
T9993766-
51
2.0
T2363907B
T9993767-
64
2.5
T2363907C
T9993768-
76
3.0
T2363907D
T9993769-
89
3.5
T2363907E
T9993770-
102
4.0
T2363907F
T9993771-
114
4.5
T2363907G
T9993772-
127
5.0
T2363907H
T9993773-
152
6.0
T2363907I
T9993774-
203
8.0
T2363907J
T9993775-
254
10.0
T2363907K
T9993776-
305
12.0
T2363907L
T9993777-

 

www.elcometer.com