search heads & accessories

Elcometer Home Page

 

 

STANDARD SEARCH HEAD

Designed to meet most of your measurement requirements.
Cover Range
40mm / 1.6" bar
15mm to 95mm / 0.6" to 3.75"
8mm (0.3”) bar
8mm to 70mm / 0.3" to 2.75"
Dimensions
155 x 88 x 42mm / 6.1 x 3.5 x 1.65"
Sensing Area
120 x 60mm / 4.72 x 2.36"
Part Number
TW33119124-1A

 

NARROW PITCH SEARCH HEAD

Accurately measures the cover thickness when the gaps between each of the rebars (pitch) are close together.
Cover Range
40mm / 1.6" bar
8mm to 80mm / 0.3" to 3.1"
8mm (0.3”) bar
5mm to 60mm / 0.2" to 2.4"
Dimensions
155 x 88 x 42mm / 6.1 x 3.5 x 1.65"
Sensing Area
120 x 60mm / 4.72 x 2.36"
Part Number
TW33119124-2A

 

DEEP COVER SEARCH HEAD

The ideal search head for accurately measuring rebars that are deep within the structure.
Cover Range
40mm / 1.6" bar
35mm to 180mm / 1.4" to 7"
8mm (0.3”) bar
25mm to 160mm / 1.0" to 6.3"
Dimensions
170 x 94 x 54mm / 6.7 x 3.7 x 2.1"
Sensing Area
160 x 80mm / 6.3 x 3.15"
Part Number
TW33119171A

 

DUAL SEARCH HEAD FOR HIGH TENSILE AND STAINLESS STEEL

The ability to detect high tensile steel and three grades of stainless steel (304, 316 and Duplex). For use with Model THD only.
Cover Range
40mm / 1.6" bar
35mm to 180mm / 1.4" to 7"
8mm (0.3”) bar
25mm to 160mm / 1.0" to 6.3"
Dimensions
170 x 94 x 54mm / 6.7 x 3.7 x 2.1"
Sensing Area
160 x 80mm / 6.3 x 3.15"
Part Number
TW33120014D

 

BOREHOLE PROBE

The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Measurement Depth
Short Probe: 0 - 40cm / 0 - 16" 0 - 100cm / 0 - 40"
Long Probe: 0 - 100cm / 0 - 40"
Approximate detection ranges
Tendon duct (70mm / 2.75" diameter: up to 90mm / 3.54"
Reinforcement bar: up to 60mm / 2.36"
Sensing Area
160 x 80mm / 6.3 x 3.15"
Part Number
Short Metric - TW33119223-1A
Long Metric- TW33119223-2A
Short Imperial - TW33119223-3A
Long Imperial - TW33119223-4A

 

EXTENSION ARM KIT

This kit allows the user to scan bridge decks and floor areas from a standing position. It can be connected to either the standard or narrow pitch search heads.
Cover Range
40mm / 1.6" bar
15mm to 95mm / 0.6" to 3.75"
8mm (0.3”) bar
8mm to 70mm / 0.3" to 2.4"
Dimensions
155 x 88 x 42mm / 6.1 x 3.5 x 1.65"
Sensing Area
120 x 60mm / 4.72 x 2.36"
Part Number
TW33119222

 

HALF CELL PROBE KIT
Consisting of either a copper electrode in a copper sulphate solution (Cu/CuSO4) or a silver electrode in a silver chloride solution (Ag/AgCl), each Half-Cell is a sealed unit so there is no need to mix chemicals on site. Supplied with a 25m (80ft) cable, every Half-Cell Kit is guaranteed for 5 years.
Part Number
Cu/CuSO4: TW331CUKIT
Ag/AgCl: TW331AGKIT

 

 

 

www.elcometer.com